There are various products in this group, which are selected according to the type of resin used in making the paint, the color shade, the type of leather expected in terms of fineness and coarseness, and the method of leathering the color of the mold. To receive complete information or advice on product selection, you can leave a message in the contact section to send you technical specifications and product samples. During the application of coating powders on the surface below, some air is always trapped between the coating particles. Also, usually some air remains between the very small particles that make up the paint formula, such as pigments and fillers, and the resin that surrounds them. During the baking process, these air bubbles are trying to get out of the coating. If this process is not done in a short time before the coating film hardens, the trace of air exit will remain on the surface of the coating in the form of pinholes or volcanoes, and these places can increase the rate of corrosion of the surface below the coating. The presence of the degasser causes the trapped air to escape faster and the final coating has a uniform surface without the traces of pinholes.The visual result would be an increase in the gloss of the coating of up to about 10% (depending on the coating formulation)